{{ name }}
Número de artículo {{ combinedCodeWithHighlight }}
Código del artículo:
EAN / GTIN:
Número del fabricante:
N.º de cat.:
Macho de roscar a máquina, Sin revestimiento, M: M10
Número de artículo: 131850 M10
Código del artículo:
Ofertas
Detalles de producto
Datos técnicos
| Tool material | HSS-E | |
| Coating | uncoated | |
| Cutting direction | right-hand cutting | |
| Thread D | M10 | |
| Thread pitch | 1.5 mm | |
| Thread type | M | |
| Thread tolerance class | ISO 2 6H | |
| Core hole diameter | 8.5 mm | |
| Application for type of drilling | through hole | |
| Shank diameter DS | 10 mm | |
| Square-drive width across flats □ | 8 mm | |
| Overall length L | 100 mm | |
| Taper lead form | B | |
| Standard | DIN 371 | |
| Flank angle | 60 degrees | |
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet maximum | suitable only under restricted conditions | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL01002105 | |
| Holder shape | smooth shank with square drive | |
| Holder tolerance class | h9 | |
| Length of shank LS | 54 mm | |
| Oil | suitable | |
| Cooling lubricant | yes | |
| Nominal diameter of metric thread D | 10 mm | |
| Number of thread turns | 1 | |
| Chisel edge diameter | 8 mm | |
| Length of tapping part Lc | 26 mm | |
| Tap infeed length | 4.5 mm | |
| Taper lead angle | 8 degrees | |
| Number of teeth | 3 | |
| Twist direction | neutral, straight | |
| Twist angle | 0 degrees | |
| Type of thread-cutting tool | machine tap for conventional machining | |
| Cutting part version | with lubrication groove and dirt trap groove | |
| To depth (x diameter) | 3 | |
| Number of clamping slots | 3 | |
| Core hole diameter guideline value | 8.5 mm | |
| Reinforced shank | sí | |
| Normlänge L | 100 mm | |
| Machining group | K (cast iron); N (non-ferrous metals); P (steel) | |
| Cutting media, manufacturer’s designation | HSS-E | |
| Interface | joint 1 | |
| Usable length L1 | 30 mm | |
| Weight | 50 g | |
| Tool version | solid steel | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | without | |
| Type of product | taps | |
| Content | single part |
Identificación y clasificación
| Número de artículo | 131850 M10 | |
| EAN / GTIN | 4045197070500 | |
| Número del fabricante | 131850 M10 | |
| Fabricante/responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Tablas de Aplicación
N
13
P
15
P
15
P
15
K
9
N
13
Descripción
Version:
Strong spiral point. Guide section with oil grooves, but without chip flutes.
Advantage:
Particularly strong, optimum self-guidance and no recutting when reversed.